gel spinning meaning in Chinese
凝胶纺丝
Examples
- Preparation process of aerogel films for icf target by sol - gel spin - coating method
靶用气凝胶薄膜工艺研究 - ( 2 ) zno thin films were prepared on glass substrates by sol - gel spin - coating method . the optical properties and surface morphologies of the films were investigated using photoluminescence ( pl ) , optical transmission spectra , and atomic force microscope ( afm ) , respectively
( 2 )利用sol - gel旋涂法在普通盖玻片上生长了zno薄膜,用光学透射谱、光致发光谱和原子力显微术研究了zno薄膜的光学性质和表面形貌。 - Thin films with thickness of 0 . 31m and 0 . 36m respectively on si substrate , have been successfully prepared by a sol - gel spin coating method . cubic nanocrystals can be obtained at relatively low sintering temperature with an average grain size of about 47 nm and 51 nm respectively . the aluminia - doped scsz thins film are the same dense as the scsz thin films . however , there are a small amount of pinholes found in the microstructure of the titania - doped scsz films
0 . 70固体电解质纳米晶薄膜。烧结实验结果表明，两种薄膜均在650以上开始晶化，温度越高，晶化越完全，在800可完全晶化所得纳米晶颗粒呈纯的萤石结构立方相铝和钛掺杂的纳米晶颗粒的平均大小分别为47和51nm 。